 PLASTIC PAINT |
| DESCRIPTION: |
| It is a PVA emulsion based mat final layer inner surface paint. |
| APPLICATION: |
| The
surface on which Imbosan Plastic Paint will be applied must have been
purified from the agents that prevent sticking such as dirt, oil,
dust etc. Imbosan Plastic Paint can be used on the building materials
such as plaster, concrete and chipwood etc. The mixture proportions for the applications with brush must be 1 unit of paint and 1 unit of water for the first layer and 2 units of paint and 1 unit of water for the second layer. The mixture proportions for the applications with roll must be 2 units of paint and 1 unit of water for both the first layer and second layer separately . Wait at least two hours between applications for the paint layers. |
| POINTS TO BE NOTICED: |
| - Imbosan Plastic must be mixed before the application. |
| - Application must not be performed at temperatures below +5C. |
| - If any paint has remained in the package, it must be closed up tightly in order not to let the air in. |
| - By taking the shade differences into account, make sure that you see the materials that have the same charge numbers on the same surface. |
| CONSUMPTION: |
| 10-15 mt2/lt for a single layer. |
| DRYING: |
| Touch 1 hour; complete drying 24 hours (under 20°C temperature and surface conditions) |
| STORING: |
| It must be stored in an environment between +5°C and +25°C which is dry, shaded and protected from frost. |
| WARNINGS |
| R 22 |
