 SILICON BASED OUTER SURFACE PAINT |
| DESCRIPTION: |
| It is a silicon based and durable outer surface paint. |
| CHARACTERISTICS: |
| Since it has a high alkaline resistance, it perfectly sticks with its undercoat which is suitable to the both old and new surfaces. It is highly resistant againts the negative effects of rain, moisture, sunshine and the salt near the sea. While it does not let the water in due to its water-proof characteristic, it removes the moisture the environment due to high moisture permeability characteristics. |
| APPLICATION: |
| It is used on all kind of concrete, gas-concrete, coal-dust brick, brick, plaster and similar mineral surfaces. The surfaces on which imbosan silicon paint will be applied must have been purified from the agents that prevent sticking such as dirt, oil, dust etc. The prepared surfaces must be undercoated with imbosan silicon undercoat. Then imbosan Silicon Paint is applied with %10 dilution on the first layer and without any dilution on the second layer. The waiting period between the layers must be 12 hours. |
| POINTS TO BE NOTICED: |
| - Imbosan silicon must be mixed before the application. |
| - Application must not be performed at temperatures below +5C. |
| - If any paint has remained in the package, it must be closed up tightly in order not to let the air in. |
| - By taking the shade differences into account, make sure that you see the materials that have the same charge numbers on the same surface. |
| CONSUMPTION: |
| 10-15 mt2/lt for a single layer. |
| DRYING: |
| Touch 1 hour; complete drying 24 hours (under 20°C temperature and surface conditions) |
| STORING: |
| It must be stored in an environment between +5°C and +25°C which is dry, shaded and protected from frost. |
| WARNINGS |
| R 22 |
